Why does my drain keep clogging?

Was the blockage fully cleared?

Restored flow does not always tell you how much material remains in the line. Buildup may still be present, or the restriction may be farther along than the section previously cleaned. Ask what the earlier service reached and whether there are inspection findings you can share.

One fixture or several?

An isolated slow sink calls for a different investigation from several fixtures backing up together. Note whether water rises elsewhere when another fixture drains. Explain what you have already observed; you do not need to recreate a backup for the call.

For help describing the difference, read One slow drain, or a sewer problem?.

What can make a blockage return?

Material accumulating in the line, roots or a damaged section are possible explanations. The symptoms alone do not identify which one applies. A recurring clog also does not automatically mean that the sewer needs replacement.

Ask what evidence supports the proposed next step. Drain cleaning or sewer cleaning addresses an obstruction; camera inspection may help investigate visible conditions in an accessible line. A blockage or poor visibility may limit what an inspection can show.

What to have ready

• Which fixtures are affected and whether several changed at the same time.
• When the problem returned after the last service.
• What previous cleaning or repairs involved, if known.
• Any earlier inspection findings and drain products already used.

Questions worth asking

Ask which section is being investigated, what was found and what remains uncertain. If repair is recommended, ask why cleaning alone would not address the observed problem. The goal is a next step supported by the condition of your line.

Call Dunnrite at 810-990-8653 to discuss the pattern. For an active backup, call about emergency service rather than waiting for a website response.